Out of stock
The Mag Double allows you to combine two magazines into one larger capacity magazine. It doesn’t just hold two magazines together for a faster reload, it actually allows you to feed two magazines worth of rounds from one magazine assembly.
Assembly is easy, you simply remove the baseplates from your magazines, and then the locking plate from the end of the springs. Press the two springs together on the remaining locking plate, then lock the two magazines together with the Mag Double. Tighten down the front, and you’re ready to rock.
The Mag Double allows you to easily create a rigid and reliable 60 round magazine from two 30 round magazines, or even an 80 rounder from two 40s. Or mix and match 10s, 20s, 30s, 40s, you know, whatever you want.
This version fits GEN3 PMAGs. For Gen2, click here. These Mag Doubles have been manufactured with 3D printing technology.
Tighten down the screws until you reach a moderate resistance. There will still be a gap in the front of the Mag Double. Don’t tighten past the point where the screws extend all the way out of the holes on the other side.