Sale!

Rex Silentium SEG H 9mm

$549.50 $479.50

In stock

SKU: SEG-H9 Category: Tags: ,

Description

THIS SUPPRESSOR COMES WITH A RED WIPE INSTALLED BEHIND THE END CAP. DO NOT SHOOT HOLLOW POINT OR EXPANDING AMMO UNLESS THIS WIPE IS REMOVED FIRST!!! WHEN USING THE WIPE IN ANY CONFIGURATION, ONLY SHOOT FULL METAL JACKET AMMO (FMJ)!!!

The SEG H represents the evolution of many unique development cycles to find the intersection of suppression, simplicity and economy. Configurable into one of three lengths, no special tools needed for maintenance or reconfiguration. A common 15/16″ wrench or socket is all that is needed. Built from hardened 17-4 Stainless Steel (190KSI tensile strength) and 7075 Aluminum, it can take a hell of a beating. Did we mention quiet? In its full length configuration it is impressively quiet across the full range of 9mm and even subsonic rifle cartridges like the 300 Blackout.

Why segments? Mission Configuration of course!

The primary segment is engraved at the very back giving it maximum survivability in the event of a baffle strike or other failure. The first baffle is hardened 17-4 stainless steel as these baffles take the brunt of the high velocity gasses and abrasion from carbon. These stainless steel baffles protect the aluminum baffles that follow them. With proper service and baffle rotations, the SEG H suppressor with provide a lifetime of hearing protection. A 100% no-fault lifetime warranty comes standard, as with all Rex Silentium products.

For best and critical suppression, use the shortest barrel available with subsonic velocity 9mm FMJ, NO HOLLOW POINTS WITH THE WIPE INSTALLED!!!. Keep it clean and remember that after cleaning use some ablative gel (petroleum jelly or similar) on all internal parts before reassembly. The wipe can easily be replaced as a repair item by you or a gunsmith.

According to current BATFE guidance, repairing the wipe by direct replacement is allowed but making and keeping spares is NOT! Contact your legal counsel and or the NFA branch of BATFE for more information. We do not sell replacement wipes.

Configurations and specs:

Configuration: LENGTH WEIGHT w/
booster
WEIGHT w/ opt
FIXED BARREL KIT
FULL 3 SEGS 8.2″ 9.5oz 7.5oz
MEDIUM 2 SEGS 5.6″ 7.6oz 4.9oz
COVERT 1 SEG 3.1″ 5.7oz 3.0oz

Key features:

  • ONE TAX STAMP… MANY CONFIGURATIONS!
  • Rated for: 9mm, 300 blackout subsonic, 380ACP, 32ACP, 25ACP, 22LR, 22WMR, 17HMR, 17WSM, 5.7×28 (no barrel length restrictions)
  • Comes with 1/2-28 Piston
  • Hardened 17-4 SS Primary Baffle, Piston Cage and Piston (hardened to 190,000 PSI tensile strength) takes all the extreme abrasion and high pressures
  • Baffles seal to each other to minimize carbon buildup in the segments (easy disassembly for cleaning)
  • Repairable High-Strength High-Temperature Silicone Rubber Cap Wipe (McMaster-Carr item 5787T65 and Punch 3427A26)
  • Full Auto rated
  • Easy to service and reconfigure
  • 100% no-fault warranty, valid across the known universe and until the end of time

INSTRUCTIONS & CONFIGURATIONS

Sound Pressure Levels (measured 1M left of muzzle and 1.6M above ground):

Cartridge/Host Configuration SPL
9mm SUBSONIC/Glock 19 FULL no wipe 123.62dB
9mm SUBSONIC/Glock 19 FULL w/wipe 123.49dB
300BLK/16″ bolt action FULL w/fixed bbl kit, no wipe 134.7dB
9mm SUBSONIC/Glock 19 MEDIUM w/wipe 138.88dB
9mm SUBSONIC/Glock 19 MEDIUM no wipe 139.65dB
9mm SUBSONIC/Glock 19 COVERT w/fixed bbl kit, w/wipe & ablative 142.32dB